Preparations before the operation of wood briquette machine

First, check the connection of the bolt. The connection of the bolt must not be loose. Fasten the bolt with tools in time once it is loose and pay attention to the circuit connecting the electrical appliances and power supply. Besides, the lubrication parts should also be checked carefully and add lubricating oil timely, which is the precondition of the good operation of briquette machine.

Second, check whether the power supply and voltage of wood briquette machine is normal. The voltage instability is unfavorable for the production. In the actual production, make no-load running first. If there is no stuck, collision or other abnormal phenomenon, then it can be put into normal production. When the abnormal is found in the test running of wood briquette machine, the operator must stop the machine immediately and find out the reasons, and then make the no-load running again after troubleshooting.

Finally, when the temperature of the temperature regulator reaches the preset temperature, start the wood briquette machine and feed the materials in appropriate amount. Increase the amount of feeding gradually until qualified products can be produced with the wood briquette machine. Then, increase the feeding amount of raw materials to improve the output of wood briquette machine. Before stopping the machine, there should be no material in the hopper. Reverse the machine immediately for one minute after stopping the machine to remove the materials in the propeller.

KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.

TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/

How does the moisture influence the wood briquette machine

The moisture content of materials plays an important role in the process of wood briquette machine. Excessive moisture content of materials would reduce the stickiness of the lignin. It just like there is too much water in the glue; while lower moisture content of materials can not dilute the lignin so that the lignin has no liquidity to glue the surrounding materials.

Experiments show that when the moisture content of material is 6 ~ 14%, the adhesive effect is best and the briquettes produced by wood briquette machine have the best quality. When drying particle materials like sawdust, the pulse pneumatic pipeline drying system had better be used, since it has fast drying speed, the drying effect is uniform and fuel saving. Pulse airflow drying machine is equipped with a boiling room, which can make materials with different moisture content automatically into the next period of drying respectively to obtain consistent moisture content of materials and ensure the quality of the briquettes. The design of pulse airflow drying machine must be in strict accordance with the principle of fluid dynamics. The air pipe diameter and the length, the size of the induced draft fan can't be designed randomly. At present, many manufacturers don't have the technical ability to design the production so that materials can't be dried normally. As a result, materials are too wet for drying once and too dry for twice. In addition, the humidity is severely uneven, which would seriously affect the briquetting effect of wood briquette machine.

KMEC is one of the earliest and largest biomass briquette press manufacturer that provides our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.

TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/