A professional operator of briquette machine should not only know how to operate the briquette machine, but also know what matters should be avoided when using briquette machine:
1, To avoid materials fed into the briquette machine are too dry. If the materials fed into the briquette machine are too dry, it would lead to serious wear of the internal parts of briquette machine, affecting the service life of the equipment;
2, To avoid iron, bolt and other impurities being mixed in the materials when feeding, otherwise it will destroy the internal parts of briquette machine and lead to fatal damage to the briquette machine;
3, To avoid the lines malfunction. If the line of briquette machine breaks down, it would not only failed to work, but also lead to safety accidents;
4, To avoid not checking whether there is residual material in the briquette machine before starting or stopping the machine. If there is residual material in the briquette machine, when you start the machine, the load would increase, even get the motor burnt out;
5, To avoid that the bearing can not operate properly. If the bearing of briquette machine can not operate properly, it will increase the load of the motor, which will burn out the motor after a long time operating.
Friday, July 15, 2016
Tuesday, May 17, 2016
Preparations before the operation of wood briquette machine
First, check the connection of the bolt. The connection of the bolt must not be loose. Fasten the bolt with tools in time once it is loose and pay attention to the circuit connecting the electrical appliances and power supply. Besides, the lubrication parts should also be checked carefully and add lubricating oil timely, which is the precondition of the good operation of briquette machine.
Second, check whether the power supply and voltage of wood briquette machine is normal. The voltage instability is unfavorable for the production. In the actual production, make no-load running first. If there is no stuck, collision or other abnormal phenomenon, then it can be put into normal production. When the abnormal is found in the test running of wood briquette machine, the operator must stop the machine immediately and find out the reasons, and then make the no-load running again after troubleshooting.
Finally, when the temperature of the temperature regulator reaches the preset temperature, start the wood briquette machine and feed the materials in appropriate amount. Increase the amount of feeding gradually until qualified products can be produced with the wood briquette machine. Then, increase the feeding amount of raw materials to improve the output of wood briquette machine. Before stopping the machine, there should be no material in the hopper. Reverse the machine immediately for one minute after stopping the machine to remove the materials in the propeller.
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Second, check whether the power supply and voltage of wood briquette machine is normal. The voltage instability is unfavorable for the production. In the actual production, make no-load running first. If there is no stuck, collision or other abnormal phenomenon, then it can be put into normal production. When the abnormal is found in the test running of wood briquette machine, the operator must stop the machine immediately and find out the reasons, and then make the no-load running again after troubleshooting.
Finally, when the temperature of the temperature regulator reaches the preset temperature, start the wood briquette machine and feed the materials in appropriate amount. Increase the amount of feeding gradually until qualified products can be produced with the wood briquette machine. Then, increase the feeding amount of raw materials to improve the output of wood briquette machine. Before stopping the machine, there should be no material in the hopper. Reverse the machine immediately for one minute after stopping the machine to remove the materials in the propeller.
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Monday, May 16, 2016
How does the moisture influence the wood briquette machine
The moisture content of materials plays an important role in the process of wood briquette machine. Excessive moisture content of materials would reduce the stickiness of the lignin. It just like there is too much water in the glue; while lower moisture content of materials can not dilute the lignin so that the lignin has no liquidity to glue the surrounding materials.
Experiments show that when the moisture content of material is 6 ~ 14%, the adhesive effect is best and the briquettes produced by wood briquette machine have the best quality. When drying particle materials like sawdust, the pulse pneumatic pipeline drying system had better be used, since it has fast drying speed, the drying effect is uniform and fuel saving. Pulse airflow drying machine is equipped with a boiling room, which can make materials with different moisture content automatically into the next period of drying respectively to obtain consistent moisture content of materials and ensure the quality of the briquettes. The design of pulse airflow drying machine must be in strict accordance with the principle of fluid dynamics. The air pipe diameter and the length, the size of the induced draft fan can't be designed randomly. At present, many manufacturers don't have the technical ability to design the production so that materials can't be dried normally. As a result, materials are too wet for drying once and too dry for twice. In addition, the humidity is severely uneven, which would seriously affect the briquetting effect of wood briquette machine.
KMEC is one of the earliest and largest biomass briquette press manufacturer that provides our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Experiments show that when the moisture content of material is 6 ~ 14%, the adhesive effect is best and the briquettes produced by wood briquette machine have the best quality. When drying particle materials like sawdust, the pulse pneumatic pipeline drying system had better be used, since it has fast drying speed, the drying effect is uniform and fuel saving. Pulse airflow drying machine is equipped with a boiling room, which can make materials with different moisture content automatically into the next period of drying respectively to obtain consistent moisture content of materials and ensure the quality of the briquettes. The design of pulse airflow drying machine must be in strict accordance with the principle of fluid dynamics. The air pipe diameter and the length, the size of the induced draft fan can't be designed randomly. At present, many manufacturers don't have the technical ability to design the production so that materials can't be dried normally. As a result, materials are too wet for drying once and too dry for twice. In addition, the humidity is severely uneven, which would seriously affect the briquetting effect of wood briquette machine.
KMEC is one of the earliest and largest biomass briquette press manufacturer that provides our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Wednesday, November 25, 2015
Tips for Starting a Palm EFB Briquette Plant
To start a palm EFB briquette plant or even simply use a palm fiber briquette press, you should have an abundant supply of palm EFB first. If you enjoy a rich material resource, then you should take into consideration of drying the palm EFB. Generally, the moisture content of palm EFB accounts for about 50% or even higher due to the moist growing environment. Fortunately, Kingman can offer you specifically designed drying system aiming to dry palm EFB with a proper water content before processed into palm EFB briquette press.
To set up a palm EFB briquette plant, we should take all the equipments into account systematically, such as the crusher, dryer, palm fiber briquette press and packing machine. Especially, the palm fiber briquette press designed professionally can cater to the demands for processing both a small or large scale palm EFB briquette plant.
As for details of starting a palm EFB briquette plant, please feel free to consult us. We would like to help you with the establishment of biomass fuel business.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
To set up a palm EFB briquette plant, we should take all the equipments into account systematically, such as the crusher, dryer, palm fiber briquette press and packing machine. Especially, the palm fiber briquette press designed professionally can cater to the demands for processing both a small or large scale palm EFB briquette plant.
As for details of starting a palm EFB briquette plant, please feel free to consult us. We would like to help you with the establishment of biomass fuel business.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Tuesday, November 24, 2015
Advantages of Palm EFB Briquettes
Palm EFB briquette is the compressed palm fiber through the processing of briquetting machine. Palm fiber is one of the common biomass commodities in Malaysia. Briquetting shredded EFB fiber into EFB briquettes is a major contribution in renewable energy. The post is about the advantages of palm EFB briquettes.
Low Moisture
The moisture content of palm EFB briquettes accounts for about 8-12% whereby compared to the Shredded EFB fibre, the moisture of the latter always stands at between 50-60%. This can also predominantly imply that the transport cost is saved substantially because a big portion of moisture is eliminated during the material transformation.
High Heating Energy and Efficiency
Dried EFB briquettes and charcoal also mean the burning condition is more effective and user is able to retrieve better efficiency and predictable result. Palm EFB briquettes and charcoal will go under thoroughly combustion in boiler chamber with only 5% of substance leftover as ash content.
Easy Control and Broad application
Briquette and charcoal sizes are small in dimension and easy for repack if house-hold application is needed. Some of the palm EFB briquettes and charcoal are repacked into convenient bag size in order to be sold to end users for BBQ burning substance. Besides, palm EFB charcoal can be used for BBQ.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Low Moisture
The moisture content of palm EFB briquettes accounts for about 8-12% whereby compared to the Shredded EFB fibre, the moisture of the latter always stands at between 50-60%. This can also predominantly imply that the transport cost is saved substantially because a big portion of moisture is eliminated during the material transformation.
High Heating Energy and Efficiency
Dried EFB briquettes and charcoal also mean the burning condition is more effective and user is able to retrieve better efficiency and predictable result. Palm EFB briquettes and charcoal will go under thoroughly combustion in boiler chamber with only 5% of substance leftover as ash content.
Easy Control and Broad application
Briquette and charcoal sizes are small in dimension and easy for repack if house-hold application is needed. Some of the palm EFB briquettes and charcoal are repacked into convenient bag size in order to be sold to end users for BBQ burning substance. Besides, palm EFB charcoal can be used for BBQ.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Complete Briquetting Plant
Biomass materials such as rice husks, corn cobs, peanut shells, sunflower seed shells, coconut shuck, coffee grounds, straw stalks and wood waste including a variety of trees and shrubs, sawdust, saw shavings, twigs and branches can be processed into biomass briquettes with briquetting machines. While the complete briquetting plant includes the crusher/ hammer mill, the drying machine and the furnace. The following is the detailed information of these equipments mentioned above.
Crusher
For proper working of biomass briquette press and drying machine in the biomass briquetting plant, the size of biomass waste is an important factor in the production. There are two types of crushing machine available for make suitable size sawdust or biomass grain for following drying machine and biomass briquette press in biomass briquetting plant. The choice of proper model depends on the types and size of your materials.
In the biomass briquetting plant, the series wood crusher is suitable for preparing sawdust or biomass small grains for briquette press and dryer. It can crush raw wood of size less than 200mm (diameter) into size of 3-5mm (diameter).
It is necessary to use a wood crusher if your raw material is raw wood. Wood crusher can process raw and fresh wood with size less than 200mm (diameter). After crushed, the output size can reach diameter 3-5mm, which is suitable for further briquetting or drying.
Hammer mill
In the briquetting plant, hammer mill is suitable for preparing suitable size raw material for briquette press and dryer. It can mill raw material like tree branch, tree trimming, wood chips, wood cuttings, cotton stalk, corn stalk, wheat straw of size max 50mm.after milled, the output size can reach diameter3-5mm, that is good for working of following fryer and briquette press.
Drying is important for the proper preparation of materials prior to their briquetting. To make good quality briquette with high density, it is very important to control the moisture content of raw material to 8-12% before loading then into biomass briquette machine, so sawdust and other kinds of biomass need to be dried first.
Flash dryer
The whole system consist of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock, In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volume of hot air. Those hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe, moisture evaporates as the material traverse along the steel pipe and is rendered dry at the discharged end. Humid air is continuously exhausted, thus the material is dried. The air lock in the outlet stops the hot air to be exhausted to the atmosphere, but release the dried materials via cyclone.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Crusher
For proper working of biomass briquette press and drying machine in the biomass briquetting plant, the size of biomass waste is an important factor in the production. There are two types of crushing machine available for make suitable size sawdust or biomass grain for following drying machine and biomass briquette press in biomass briquetting plant. The choice of proper model depends on the types and size of your materials.
In the biomass briquetting plant, the series wood crusher is suitable for preparing sawdust or biomass small grains for briquette press and dryer. It can crush raw wood of size less than 200mm (diameter) into size of 3-5mm (diameter).
It is necessary to use a wood crusher if your raw material is raw wood. Wood crusher can process raw and fresh wood with size less than 200mm (diameter). After crushed, the output size can reach diameter 3-5mm, which is suitable for further briquetting or drying.
Hammer mill
In the briquetting plant, hammer mill is suitable for preparing suitable size raw material for briquette press and dryer. It can mill raw material like tree branch, tree trimming, wood chips, wood cuttings, cotton stalk, corn stalk, wheat straw of size max 50mm.after milled, the output size can reach diameter3-5mm, that is good for working of following fryer and briquette press.
Drying is important for the proper preparation of materials prior to their briquetting. To make good quality briquette with high density, it is very important to control the moisture content of raw material to 8-12% before loading then into biomass briquette machine, so sawdust and other kinds of biomass need to be dried first.
Flash dryer
The whole system consist of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock, In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volume of hot air. Those hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe, moisture evaporates as the material traverse along the steel pipe and is rendered dry at the discharged end. Humid air is continuously exhausted, thus the material is dried. The air lock in the outlet stops the hot air to be exhausted to the atmosphere, but release the dried materials via cyclone.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Rice Husk Briquette Machine
Rice husk is a kind of agro waste for processing agro by-products, which is widely used in many regions around the world. Although it seems useless, rice husk briquettes are quite useful as a kind of renewable green energy after being processed by rice husk briquette machine.
As increasing application of rice husk in rice producing countries, such as Brazil and Argentina, is a fuel in the heat generation for drying rice operations, due to its high calorific power. However, in the combustion process, only the organic part can be burned, giving silica-rich ash as the residue. Rice husk contains a considerable amount of Sio2, compared with other agricultural product. However, because of the biological origin of rice husk, small variations in the silica content can be observed for different rice varieties.
You can realize biomass briquettes production with Kingman rice husk briquette machine and briquette plant. We also provide all kinds of pellet mills, roasting machines, shelling machines and so on. Welcome all the customers to come and purchase.
As increasing application of rice husk in rice producing countries, such as Brazil and Argentina, is a fuel in the heat generation for drying rice operations, due to its high calorific power. However, in the combustion process, only the organic part can be burned, giving silica-rich ash as the residue. Rice husk contains a considerable amount of Sio2, compared with other agricultural product. However, because of the biological origin of rice husk, small variations in the silica content can be observed for different rice varieties.
You can realize biomass briquettes production with Kingman rice husk briquette machine and briquette plant. We also provide all kinds of pellet mills, roasting machines, shelling machines and so on. Welcome all the customers to come and purchase.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
Subscribe to:
Posts (Atom)