The reasons for the bearing wear of the briquette machine is verified, the post will list some of the common reasons for the bearing wear of the briquette machine in the early stages for users reference.
Improper installation of briquette machine
1. Using hammer to pound the bearing directly is the worst damage to the bearings when briquette machine is installed with violence. That is the primary reason for deformation
2. Briquette machine is not correctly installed, the briquette machine is installed with deviation or the bearing is not installed properly, that leads to too small bearing clearance. Inner and outer ring of bearing isn’t at the same center of rotation and is not concentric with each other.
Poor lubrication of bearing of briquette machine
According to the report that poor lubrication is the most important reason for bearing wear in the early stages. Primary causes include: No lubricate or grease timely, lubrication oil or lubricant is not properly injected; choosing inappropriate type of lubrication oil or lubricant; inappropriate way of lubrication and so on.
Recommendation: choose the right type of lubrication oil or lubricant and inject it by the right way of lubrication
Contamination
Contamination can cause damage to the bearing of briquette machine in the early stages. Contamination means dust, metal chips etc. enter into the inside of bearings. The primary causes include: open up the package of briquette machine bearing too early before use and cause contamination; install the briquette machine in a not clean environment and leads to contamination; bearing is working in a not clean condition and contaminated by the service substance.
Recommendation: It is better not to unpack the package of bearing before use; keep the circumstance clean when the machine is installed; clear the bearing before using; enhance the performance of sealing devices
Bearing fatigue
Bearing fatigue is a common damage phenomenon. General reason for causing bearing fatigue maybe include: bearing of briquette machine work overload for a long time; No maintenance of the bearing timely; improper maintenance; ageing of equipment.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price, and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
No comments:
Post a Comment