How to Reduce the Moisture Content of Raw Materials

The moisture content of raw materials is an important factor in the briquette production. However, raining and heavy frog often cause the moisture content of raw materials increased when we use the biomass processing equipment, which would affect the quality of charcoal or biomass briquette seriously. Therefore, we must pay attention to moisture content and dry the materials before briquetting them.

High-speed hot air stream is often used in the biomass briquette process to dry the materials. The hot air enters into the bottom of the drier in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. The paste state materials enter into the drier through the screw charger. Under the powerful function of the stirring vanes at high-speed rotation, the materials are distributed under the function of strike, friction and shearing force. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried materials after the de-watering will go up with the heat-air flow. The step rings will stop and keep the big particles. Small particles will be discharged out of the drier from the ring center and will be restored by the cyclone and dust remover. The not-fully-dried or big piece materials will be sent to the wall of the equipment by centrifugal force function and be smashed again after they fall down to the bottom.

Contact us

KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.

TEL: +86-372-5388851

FAX: +86-372-5388852

E-mail: info@chinapeanutmachinery.com

http://www.woodbriquetteplant.com/