Biomass briquetting is a complicated process. In order to get successful briquetting, you need to have a good understanding and master the skills of the whole process. The following are some factors that could influence the quality and efficiency of the briquetting.
Drying: To maintain output moisture of around 15 percent, the temperature of the discharge flue gas should be maintained at 85 degrees C. This can be done by controlling the cold air injection into the hot air from the hot air generator.
Die Holder Temperature: For smooth production of briquettes, the die holder temperature should be maintained around 300 degrees C by regulating the water flow into the die holder.
Die Holder Pressure: The die holder pressure is similarly maintained at the desired level.
Cooling Oil Temperature: The lubricating oil temperature should be controlled by an automated radiator fan.
Grinding: It is difficult to optimize loading of the grinding system, however, traveling bottom bins are effective. The bottom bin speed is adjusted and controlled in proportion to the desired input into the grinder and increases until the maximum grinding load is achieved. On/off controls start functioning at optimum loading.
Densification Equipment: Controlling the material input flow from the storage bin into the briquette machine is relatively easy. The input flow increases to maximum load per the load setting on the press.
Besides the above factors, there are other requirements to improve the briquetting quality and efficiency, such as the raw materials used, the replacement of wearing parts and so on. Contact us for more information.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
No comments:
Post a Comment