Charcoal briquette machine takes waste materials, offcuts and residues of agriculture, forestry and industry as raw materials to produce biomass briquette fuel which can be further carbonized into charcoal with charcoal machine or carbonizing furnace. Charcoal made from briquettes features no loss, smokeless and environment-friendly. It can be widely applicable to agro planting, industrial production, food and pharmacy as well as domestic use. There are some failures you may run into during the process of briquetting based upon charcoal briquette machines.
1. Briquetting performance seems unstable due to the intermittent squeezing. The main reasons remain a shortage of heating power which results in unevenly low temperature and the feeding volume shall be kept uniform. Therefore, the heating coil of charcoal briquettes machines shall be turned on prior to briquetting for preheating of briquetting mold. Besides, ensure the auto-feeding speed stay consistent.
2. More fissures happen to the appearance of briquettes with lower density and extruding pressure. The solutions to the failure include the adjustment of screw rod, namely the propeller; change of mold; alternation of temperature; more material of rich lignin shall be mixed with.
3. Blowout of material from briquette machine. It turns out moisture content of material for briquetting is still high. It shall be dried again. The front end of screw rod, namely the propeller, shall be polished and readjusted.
4. No discharge of briquettes from the machine. The compression ratio shall be adjusted.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
No comments:
Post a Comment