Screw rods, namely propeller and forming mold of briquette machine, which shall be revamped. Otherwise, briquette press performance will be affected due to the abrasion of mold. However, the clients will encounter some failures of briquette machine relating to screw rod. Therefore, it is quite necessary for us to summarize and share with clients the knowledge about screw rod.
1. Shoddy welding material for repairing screw rods will result in short time of use. Technically, the electrode to be used should possess the characters of wear resistance and high temperature resistance. If some generally used electrode is put into practice, it is likely for the welding rod to sustain just 5 to 10 hours. And the special electrode can maintain for 100 hours plus.
2. Screw rod of briquette press may not be welded well. Electrowelding technology can just help the rod to survive for 30 hours or so while oxygen or spray welding is capable of cracking the problem of high temperature resistance. Besides, wear-resistant material under electrowelding cannot smelt into steel material evenly, the latter of which is made into screw rods.
3. Different materials demand distinguished compression ratios, which is usually ignored by clients.
Contact us
KMEC is one of the earliest and largest biomass briquette press manufacturer that provide our customers with qualified products, competitive biomass briquette price and superior service. If you need biomass briquetting press, please feel free to contact us.
TEL: +86-372-5388851
FAX: +86-372-5388852
E-mail: info@chinapeanutmachinery.com
http://www.woodbriquetteplant.com/
No comments:
Post a Comment